PLEASE NOTE: The symbol ″ refers to Inches, Foot measurements are indicated by 'ft'.
This popular fence is a quick to erect fence that is cost effective instead of a wall. The stakes are available in lengths, 4ft 6 ″, 6ft, 8ft 6 ″, 9ft, 10ft and 11ft.
The matching panel between the h-posts are available in the following sizes:
Plain Panel 1.8m long x 300mm high for use with timber panels.
Plain Panel 6ft long x 1ft high, used in a full concrete panel fence.
Rock-face Panels 6ft long x 1ft high, different top sections available as trellis top or bow effect.
Timber overlap panel 6ft long x 1ft high. This is used to create a timber effect.
4ft 6 ″, 6ft, 8ft 6 ″, 9ft, 10ft, 11ft .
The following Gravel boards are available.
This is a standard stake with seven holes for bull wire to hang a chain-link fence. It is designed for fencing off a site or keeping in animals. This stake is accompanied with a strainer post to strain the wire and a strut to brace the strainer.
6ft long (1800), 5 ½″ x 5″ at the base.
This is a standard stake with eight holes for bull wire. The stake is designed as a high fence to either deter intruders or restrict animals that can escape from a lower fence, typically dogs.
8ft 3″ long (2500mm) 5 ½″ x 5″ at the base.
This fence is to accommodate a timber rail between the stake. The size of the opening for the timber is 4″ (100mm) x 2″ (50mm), the timber would need to be slightly smaller to fit into the stake.
The dimensions of the stake are 5ft 6″ (1675mm) long. The stake is also available in: 6 ½″ (165mm) wide, 4″ (100mm) deep. The distance between the holes is 10″ (250mm).