.
PLEASE NOTE: The symbol ″ refers to Inches, Foot measurements are indicated by 'ft'.
This popular fence is a quick to erect fence that is cost effective instead of a wall. The stakes are available in lengths, 4ft 6 ″, 6ft, 8ft 6 ″, 9ft, 10ft and 11ft.
The matching panel between the h-posts are available in the following sizes:
Plain Panel 1.8m long x 300mm high for use with timber panels.
Plain Panel 6ft long x 1ft high, used in a full concrete panel fence.
Rock-face Panels 6ft long x 1ft high, different top sections available as trellis top or bow effect.
Timber overlap panel 6ft long x 1ft high. This is used to create a timber effect.
4ft 6 ″, 6ft, 8ft 6 ″, 9ft, 10ft, 11ft .
The following Gravel boards are available.
This is a standard stake with seven holes for bull wire to hang a chain-link fence. It is designed for fencing off a site or keeping in animals. This stake is accompanied with a strainer post to strain the wire and a strut to brace the strainer.
6ft long (1800), 5 ½″ x 5″ at the base.
This is a standard stake with eight holes for bull wire. The stake is designed as a high fence to either deter intruders or restrict animals that can escape from a lower fence, typically dogs.
8ft 3″ long (2500mm) 5 ½″ x 5″ at the base.
This is a 10ft (3000mm) security fence with a crook on the top to deter intruders, The stake has 8 holes for bull-wire to be able to hang a chain-link fence to it. The stakes are accompanied with a strainer post and strut to strain wire at the end of the fence.
10ft (3000mm) long, 5 ½″ (140mm) wide and 5″ (125mm) deep at the base of the stake.
This fence is to accommodate a timber rail between the stake. The size of the opening for the timber is 4″ (100mm) x 2″ (50mm), the timber would need to be slightly smaller to fit into the stake.
The dimensions of the stake are 5ft 6″ (1675mm) long. The stake is also available in: 6 ½″ (165mm) wide, 4″ (100mm) deep. The distance between the holes is 10″ (250mm).
This is a two bar ranch post. The stake is typically used in housing estates to separate driveways between semi-detached houses. The stake accepts two 5″x1¾″ timbers.
39″ long (1000mm), 6″ wide(150mm), 4 ¾″deep (120mm).
This post and rail fence with two bars, (a two rail fence). The fence is supplied with a concrete rail 2.5m long, 4″ high, 3″ wide.
The dimensions of a two rail post are:
6ft6in (2000mm) long, 7in wide(125mm), 4” (100mm) deep.
The distance between rails is 24” (600mm).
This post and rail fence with three bars, (a three rail fence). The fence is supplied with a concrete rail 2.5m long, 4″ high, 3″ wide.
The dimensions of the three hole stake is:
6ft 6″ (2000mm) long, 7″ wide(125mm), 4″ (100mm) deep.
The distance between rails is 13″ (330mm).
This is a post designed to hang up-to a 16ft gate into a field. There are two versions, one has a hole for to hang a gate only, the second one has a hole through to hang a gate or bolt gate into an open slot in the post.
7ft 6″ long 8″ wide and 7″ deep.
Doran Concrete Products Ltd, Newtown Commons, New Ross, Co. Wexford.
Tel: +353 51 422050 | Fax: +353 51 426921 | Email: sales@doranconcrete.ie
Company Registration No. 294752 | VAT No.: 8294752O | Copyright: © 2011 Doran Concrete Products Ltd.
Website and Brand Identity Design by Zofo Creative :: Built to accommodate a 1024 x 768 browser.